Fiber Reinforced Concrete (FRC) is gaining increasing attention among the concrete community due to its reduced construction time and labor costs.

PAV to simulates in-service oxidative aging that occurs in asphalt binders during service after 5 to 10 years (long-term aging).

VDO is used to remove air bubbles formed in the simulation of bitumen and bituminous binders of PAV pressure aging vessel.

The vacuum drying device is specifically designed for rapid drying of compacted asphalt cores and samples.

The instrument is used for compression testing of asphalt surface.

Used to determine the dynamic deformation modulus Evd in MPa [MN/m2] by means of the dynamic plate load test.

The Gyratory Compactor is used to simulate and reproduce real compaction conditions for real pavement operations, thereby determining the compaction properties of asphalt.

The Smartracker Wheel Tracker is used to determine the resistance of hot asphalt mixes (HMA) to rutting and moisture sensitivity.

MC-1 Elite and MC-3 Elite Nuclear Moisture and Density Meters are nuclear based density and moisture measurement devices used to measure the compaction and water content of asphalt, soil and concrete (RCC).

Load and displacement parameters measured by the automatic SCB System; is used to predict the cracking performance of asphalt mixes based on the Critical Stress Energy Release Ratio (Jc.) and the Illinois Flexibility Index (I-FIT).

The unit has been designed for the purpose of determining the bitumen content in asphalt mixture.

It is used to produce representative sample slabs of several dimensions of bituminous mixtures laid and compacted on site.

Vortex Electromagnetic Mill-Cement Mill is used to grind and granulate cement without disturbing its structure.

Concrete Scanner - Ground Penetrating Radar (GPR) is used for accurate scanning and real time analysis of concrete structures. 

CoreLok is used to measure asphalt and aggregate specific gravity, maximum specific gravity, porosity and % asphalt content.

Determines the quality and consistency of the concrete of drilled shafts, slurry walls, bored piles, cast-in-situ piles.

Pile Integrity Tester (PIT-Q) assesses the structural integrity of augered cast-in-place, continuous flight auger, drilled displacement and bored piles, drilled shafts, driven concrete or timber piles and concrete filled pipes.

Static Pile Loading Tester is used to evaluate the load resistance behavior of deep foundations.

Used for the initial and final setting time determination of cements or mortar pastes.

Advanced Technologies for Asphalt and Bitumen Testing

This high technology digital microprocessor tester, automatically determines the softening point of asphalt, bitumen and pitches.

DTS-30 can perform tension, compression dynamic loading tests on asphalt, ground, fiber, plastic etc. materials.

Thermal Integrity Profiler (TIP) assesses the quality of cast in place concrete foundations.

Профилометр термической целостности (TIP) оценивает качество монолитного бетонного фундамента.

FWD is a test device used to evaluate the physical properties of the coating on highways, airport roads, ports, and railway rails.

The Laser Profilometer used in IRI (roughness) measurement collects roughness data with high precision and repeatability on highways and asphalt roads.